How to Clear a Misfeed (Cont’d.)
Paper Misfeed in the Automatic Duplexer
1. Make sure that the bypass tray is opened, and then open
the automatic duplexer.
CAUTION:
y Be careful not to let your fingers be caught between
the equipment and the automatic duplexer.
y Do not touch the metal portion of a guide board as it
could burn you.
2. Lift the paper guide as indicated by the arrow and remove
any misfed paper.
3. Lower the paper guide and return the automatic duplexer
to the original position.
y Be sure to close both sides of the Automatic Duplexer
unit firmly.
1. Open the front cover of the finisher.
2. Rotate the green knob in the middle clockwise.
y When the stapler is up, the window in the upper right
of the knob becomes blue.
3. Remove any misfed paper in the paper exit area.
4. Close the front cover.