Connecting an amplifier equipped with a Dolby® Digital decoder
| Dolby Digital | ||||
| Dolby Digital is the surround sound technology used in theaters | ||||
| showing the latest movies, and is now available to reproduce this | ||||
| realistic effect in the home. You can enjoy motion picture and live | ||||
| concert DVD video discs encoded via the Dolby Digital recording | ||||
| system with this dynamic realistic sound by connecting the TV/DVD to | ||||
| a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby | ||||
Connecting TV/DVDyour | Digital processor. If you have a Dolby Surround Pro Logic decoder, you | ||||
will obtain the full benefit of Pro Logic from the same DVD movies that | |||||
| |||||
| provide full | ||||
| with the Dolby Surround mark. | ||||
| TV/DVD back panel | ||||
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
To COAXIAL
DIGITAL AUDIO OUT
Amplifier equipped with a |
Dolby Digital decoder |
To COAXIAL |
type digital |
audio input |
Connecting an amplifier equipped with a DTS® decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.
TV/DVD back panel
To COAXIAL
DIGITAL AUDIO
OUT
Amplifier equipped with
a DTS decoder
To COAXIAL 
type digital audio input
You will need:
• one coaxial cable
Notes:
•DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the
•Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.
•Refer to the owner’s manual of the connected equipment as well.
•The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
•Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the speakers may be damaged.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the
You will need:
• one coaxial cable
Notes:
•Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.
•Refer to the owner’s manual of the connected equipment as well.
•The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
•Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the speakers may be damaged.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
18
18 | 13/3/06, 5:20 PM |
