Adding and erasing channels manually
After you have automatically programmed all active channels into the TV’s memory, you can manually add and erase individual channels.
To add or erase a channel in the TV’s memory:
RECALL MUTE
o
POWER
Setting up your TV
1.Tune the TV to the channel you want to add or erase. If you are adding a channel, you will need to use the CHANNEL NUMBERS to select the channel.
2.Press MENU.
3.Press x or • to highlight the SET UP menu.
4.Press y or z to highlight ADD/ERASE.
SET UP
LANGUAGE: |
|
| |
| [ENGLISH] FRANCAIS ESPANOL | ||
TV/CABLE: | [TV] CABLE | ||
CH PROGRAM |
|
| |
ADD/ERASE: | [ADD] ERASE | ||
MORE |
|
|
|
MOVE [ | ] | SELECT [ | ] |
5.Press x or • to highlight ADD or ERASE, whichever function you want to perform.
6.Press MENU.
7.Repeat steps
Changing channels
To change to the next programmed channel:
Press CHANNEL yz.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and then the next two channel numbers (for example, to select channel 100, press 100, 0, 0; to select channel 125, press 100, 2, 5).
Image tilt correction
When you install or change the direction of the TV, the picture may become tilted (caused by the Earth’s magnetism). If this happens, use the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1.Press MENU, and then press x or • until the SET UP menu appears.
2.Press y or z to highlight IMAGE TILT.
3.Press x or • to adjust the picture tilt (from –10 to +10).
SET UP
MORE
DEMO | [START] STOP |
|
|
| |
IMAGE TILT | +3 – |
|
| + | |
MOVE [ | ] | SELECT [ | ] |
|
|
1 2 3
4 5 6
7 8 9
CH RTN
100 0 ENT
CH
VOL MENU/ VOL 
ENTER
CH
TV
CABLE
VCR EXIT
CHANNEL NUMBERS
MENU
yz x •
CHANNEL
yz
EXIT
18