Connecting your TV
If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.)
•A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors.
•Audio and video cables are usually color coded according to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo (or mono) left channel. If you look at the rear panel of the TV, you will see that the terminals are color coded in the same manner as the cables.
•
• ColorStreamTM cables come in sets of three and provide the best | Caution: |
picture performance. ColorStream cables can only be used with | Do not plug the TV in until you have finished |
ColorStream compatible components. | connecting all of your equipment. |
Connecting your TV
ANTENNACable
Coaxial Cable
AUDIO | ColorStream |
Cable | Cable |
VIDEO
Cable
Connecting a VCR
This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and to record from one channel while watching another channel.
TV
| IN | Y | OUT | |
|
|
| ||
VIDEO |
| VIDEO | ||
ANT (75Ω) |
| PB |
| |
L/MONO | L/MONO | |||
| ||||
AUDIO | PR | AUDIO | ||
| R |
| R | |
| VIDEO 1 | VIDEO 2 |
| |
Cable
Stereo VCR
| IN |
| |
IN from ANT | OUT to TV |
| |
| OUT |
| |
CH 3 | L | R | |
CH 4 | |||
VIDEO | AUDIO | ||
|
You will need:
•one coaxial cable
•one pair of audio cables (only one cable for a mono VCR)
•one video cable
Caution:
If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a
When the video cable and the
4