Toshiba 32C120U, 40E220U Storing channels in memory (optional)

46 Setting up your TV
Storing channels in memory (optional)
A new set of Installation menu icons appears.
3Open the Terrestrial menu, highlight Input Configuration,
and then press the ENTER button.
(Sample Image) Terrestrial menu - Input Configuration selection
4Highlight ANT/CABLE In and press the ( / arrow) buttons
to select the input source (Cable or Antenna).
(Sample Image) Input Configuration screen
5To save your new settings, highlight Done, and then press the
ENTER button. To revert to your original settings, highlight
Cancel, and then press the ENTER button.
Storing channels in memory (optional)
To make sure your TV stops only on the channels you want when
you press the CH ( / arrow) buttons on the remote control or the
control panel, store those channels in the TV’s memory.
Auto Tuning
You can set up the TV to detect all active channels in your area and
store them in its memory.