99
Using the TV’s features
Setting the sleep timer
Setting the sleep timerYou can set the sleep timer to turn off the TV after a set length of
time (maximum of 12 hours).
To set the sleep timer using the remote control:
1Press the SLEEP button on the remote control to set the length
of time until the TV turns off.
2Repeatedly press the SLEEP button to increase the time in
10-minute increments, or press the ( / arrow) buttons to
increase or decrease the time in 10-minute increments, to a
maximum of 12 hours.
To set the sleep timer using the on-screen menus:
1Press the MENU button and open the Setup menu.
2Highlight Sleep Timer and press the ENTER button.
3Press the Number buttons to enter the length of time
(maximum of 12 hours) and then press ENTER.
Or press the ( arrow) buttons to increase or decrease in 10-
minute increments (maximum of 12 hours).
If a power failure occurs, the sleep timer setting may be cleared.
To display the time remaining until the TV turns off, press the
SLEEP button.
A message will display on-screen when there is one minute
remaining on the sleep timer.
To cancel the sleep timer, repeatedly press SLEEP until it is set to 0
minutes.
Auto Brightness Sensor When the Auto Brightness Sensor Setting is set to On, the
television optimizes the backlighting levels to suit ambient light
conditions.
To turn on Auto Brightness:
1From the Preferences menu, highlight Energy Saving
Settings and press ENTER.
2Press the ( / arrow) buttons to select Auto Brightness
Sensor.
NOTE
NOTE