Toshiba 32HF73 Point the remote control Directly at the device, Begins playback of a tape or DVD

Using the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box)

If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so). See pages 16 and 17.

To use your TV remote control to operate a:

¥cable converter box or satellite receiver, set the Device Switch to CBL/SAT.

¥VCR, set the Device Switch to VCR.

¥DVD player or HTIB, set the Device Switch to DVD.

Point the remote control

directly at the device.

Note:

Even after the TV remote control is programmed, it may not operate certain features on your other device. If this happens and you wish to use those features, you will need to use the device’s original remote control.

Using the Remote Control

+10 (DVD only)

Press to directly access

DVD chapters higher than 10.

TOP MENU (DVD only)

Accesses a DVD’s top menu.

ENTER Required by some VCRs and cable converter boxes to change the channel.

Device Switch Set to “TV” to control the TV; “CBL/SAT” to control a cable converter box or satellite receiver; “VCR” to control a VCR; “DVD” to control a DVD player or HTIB.

PAUSE Press during play or record mode to pause the picture; press again to restart.

TV/VCR (VCR only)

To view one program while recording another, press to select TV mode.

REW Rewinds the tape or DVD. (Press during play mode to view the picture moving rapidly backward.)

REC (VCR only)

Starts tape recording.

FF Fast-forwards the tape or DVD.

(Press during play mode to view the picture moving rapidly forward.)

TV / VIDEO RECALL	POWER
INFO

1 2 3

4 5 6

			7	8	9
			+10		CHRTN
			100	0	ENT
			U			G
			N
			E	FAV		UI
			M		PI	D
		P	FAVORITE				E
	O				C
						I
T						S
						ZE
				MENU
				DVDMENU
			ENTER			EXIT		R
N
E			E	FAV			EA
		T
			R			L
						C
		TV		CH	VOL
		CBL/SAT
		VCR
		DVD
			POP DIRECT CH MUTE			SLEEP
TV/VCR				PAUSE	STOP	PLAY
				FREEZE SOURCE		SPLIT
		REW		FF	SKIP/SEARCH
CH SCAN				SWAP	POP CH
			REC			LIGHT

POWER

Turns the selected device on and off.

INFO (CBL/SAT only)

Displays on-screen information.

Channel Numbers (0-9)

Press to directly access channels (as opposed to CH y z).

GUIDE (CBL/SAT only)

Displays channel guide.

y z x • (DVD only)

Press to navigate DVD menus (may not work on some DVD players).

CLEAR (DVD only)

Press to reset the title and chapter number.

CH y z

yselects the next higher channel; z selects the next lower channel.

PLAY

Begins playback of a tape or DVD.

STOP

Stops the tape or DVD.

SKIP/SEARCH (DVD only) Skips forward to locate later DVD chapters.

SKIP/SEARCH (DVD only)

Skips back to beginning of current DVD chapter or locates previous chapters.

18