Using the POP double-window feature

The POP (picture-out-picture) feature splits the screen into a double window that allows you to watch two programs at the same time. The POP program can come from a TV broadcast or an external source, such as a VCR.

To display a TV broadcast in the POP window: 1. Press PIP to display the POP window.

Main window

POP window

 

POP

12

Note:

•The PIP buttons on the remote control operate the TV’s POP features.

•You cannot access POP features when viewing ColorStream HD1 or HD2 input.

•You cannot display the ANT-2 signal source in the POP window.

•You can choose to hear the sound of either the main or POP program (see “Selecting the Audio OUT sound” on page 49).

Using the TV’s Features

2.Press PIP CH yz to change the channel of the POP window. If the V-CHIP feature is active and you try to watch a TV program that exceeds your set rating limits, the program will be blocked (see “Using the V-CHIP menu” on page 34).

POP

24

BLOCKED

To display a picture from an external source in the POP window:

1.Connect the external source equipment (see “Connecting your TV” on page 5).

2.Select the TV program you want to watch in the main window.

3.Press PIP to display the POP window.

4.Repeatedly press SOURCE to select the input source for the POP window (VIDEO 1, VIDEO 2, or VIDEO 3 only; you cannot select ColorStream in POP mode). The current source will display in purple.

5.You can play a tape as the POP picture, or select a channel for the POP window using the VCR’s channel keys.

POP SOURCE SELECT I ON

TV

V I DEO 1

V I DEO 2

V I DEO 3

SOURCE :TO SELECT

PIP

SOURCE

PIP CH yz

To close the POP window: Press PIP again.

32