From DTV Antenna | Toshiba 34HFX84 specification

Connecting your TV

Connecting a DTV receiver/set-top box with ColorStream® (component video) and a VCR

This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs.

Your TV has ColorStream (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.

–To record and watch a DTV program, select LINE IN on the VCR, and select ColorStream HD2 (or VIDEO 1 for a non- ColorStream connection) on the TV (see “Selecting the antenna input” on page 25).

–To record a TV program while watching a DTV program, tune the VCR to the channel to record, and select ColorStream HD2 on the TV.

–To record and watch the same TV program, tune the VCR to the channel to record, and select VIDEO 1 on the TV.

–To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch.

You will need:

•three coaxial cables

•two sets of standard A/V cables

•one pair of standard audio cables

•one set of component video cables

From Antenna

Stereo VCR

IN

IN from ANT OUT to TV

CH 3			OUT
CH 3
CH 4	VIDEO	L	R
			AUDIO

TV

From

DTV Antenna

					AUDIO
					OUT
	Y	PB	PR	L	L
	Y	PB	PR
Satelite IN
S-VIDEO	COMPONENT VIDEO VIDEO			R	R
S-VIDEO	COMPONENT VIDEO VIDEO

OUT

Note:

For the highest possible picture quality, use component video cables (or an HDMI cable) between the TV and DTV receiver/set-top box.

You can connect the component video cables to either set of the ColorStream jacks on the TV (HD1 or HD2).

For HDMI connection, see page 14.

The ColorStream HD1/HD2 and HDMI jacks can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems; however, a 1080i signal will provide the best picture performance.

If your DTV receiver or set-top box is not compatible with component video or HDMI, use the S-video connections (plus the standard audio connections) instead (see page 10).

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

DTV Receiver with component video

12

Image 12

Toshiba 34HFX84 owner manual From DTV Antenna

Contents

Color Television Safety Precautions Dear Customer Important Safety Instructions Installation Service Care Important Safety Information Introduction Welcome to Toshiba Exploring your new TVIntroduction Connecting an antenna or cable TV Appendix Index Connecting a VCR Connecting a cable converter boxConnecting your TV You will need Three coaxial cables Connecting a cable converter box and VCR UsingtheTV’s Features Connecting a DVD player or satellite receiver and a VCR Satellite Receiver From Antenna Stereo VCR From DTV Antenna Connecting two VCRs Connecting a camcorderUsing Connecting an Hdmi or a DVI device to the Hdmi input One Hdmi cable type a connectorOne HDMI-to-DVI adapter cable Hdmi type a connector One pair of standard analog audio cables Connecting an audio system Preparing the remote control for use Installing the remote control batteriesUsing the Remote Control Remote Control functional key chart CBL/SAT Audio VCR TV/VCR TV/SAT Device code setup Introduction Connecting YourTV Usingthe RemoteControlSettingup YourTV UsingtheTV’s Features Appendix Index Searching and sampling the code of a device Using the volume lock feature Operational feature reset VCR setup codes Device code table CD Player setup codes Learning about the remote control Setting up your TV Learning about the menu system Changing the on-screen display language Selecting the antenna input Adding channels to the TV’s memory Programming channels automaticallyTo program channels automatically Press Enter Press z to select CH Program Adjusting the tilt correction feature Connecting yourTVChanging channels Adding and erasing channels manually Adjusting the channel settings Using the TV’s FeaturesSwitching between two channels using Channel Return Switching between two channels using SurfLock Connecting Your Usingthe RemoteControl Settingup yourTVPress Enter Repeat steps 4 and 5 for other channels Press y or z to highlight Labeling channels ClearPress Enter to erase the channel label Usingthe Features Selecting the picture size Theater Wide 1 picture size For 43 format program Press Enter to display the Scroll Adjustment mode To raise the picture, press yTo lower the picture, press z Using the Auto Aspect feature Press y or z to highlight Auto ASPECT, and then pressPress y or z to select ON, and then press Enter Using the POP double-window feature Settingup YourTV UsingtheTV’s Features Appendix Switching the main and POP pictures Switching the speaker audio main or POP Using the programmed channel search function Double-Window aspect ratio Using the favorite channel search function About the auto favorite feature Using the Locks menu Using the V-CHIP menuEntering the PIN code If you cannot remember your PIN code Enable Blocking OFF To release your setting UnlockTV Rating Independent rating system for broadcasters Press z or y to select an item Connecting YourTV Usingthe RemoteControl Settingup Mpaa Rating Independent rating system for moviesMpaa Rating Locking channels Unlocking programs temporarilyPress Enter Repeat steps 2 and 3 for other channels Press y or z to highlight Clear ALL, and then press Enter Locking the video inputs Changing the PIN codeOFF Press Enter New PIN code is now active Adjusting the picture Introduction Connecting YourTVUsingthe RemoteControl Setting Your UsingtheTV’s Features Appendix Index Selecting the color temperature Picture Settings menu appearsPress x or to select the mode you prefer Saving your new preferences Using the CableClear DNR feature Selecting the Scan Velocity Modulation SVM Resetting picture adjustments Selecting the display format for 480p signals onlySelecting the cinema mode Reset Selecting the video input source Using the closed caption feature Press y or z to highlight Caption or TEXT, and then pressTo view text, highlight T1, T2, T3, or T4 Setting the on timer Setting the sleep timer Setting the clock Press Enter to start the clockTo display the time on-screen Press Recall Adjusting the sound Usingthe Remote Settingup YourTVMuting the sound Selecting stereo/SAP broadcasts Enjoying the Dolby Virtual sound feature Using the WOW surround sound feature Adjusting the sound qualityPress y or z to adjust the item, then press Enter Audio Settings menu appears Resetting your audio adjustments Using the StableSound featureTo turn off the StableSound feature Select OFF in above Center Connecting Your Control Turning off the built-in speakersSelecting the Audio OUT sound Using the Cyclone sub-woofer system Understanding the auto power off feature Understanding the last mode memory featureSelecting the background of the menu display Displaying on-screen information Specifications Appendix Troubleshooting AntennaBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFF Limited United States Warranty Limited Canada Warranty Index Page Page Page Manufactured by