39
Operations
38
5

Select the projector to be transmitted.

A list of the MAC addresses of the wireless LAN
PC cards
p.32
,
p.60
mounted on the projectors
that are available for transmission appears. If
projector name has been set up already, it is
shown instead of the MAC address. Select the
checkbox of the projector to be transmitted to from
this list. Then icon is displayed on the
projector’s screen for few seconds.
It is possible to select up-to four projectors.
6

Click on the button.

The selected file’s image is displayed by the projector.
Note
•Only one file can be sent at a time. To send another file, repeat steps
4
and
6
.
■Operating the projector
This function can be used with any projector input.
Note, however, that this will not function with a memory PC card.
1

Launch the Wireless Utility software application.

The Screen Image transmission mode window appears on the computer’s screen.
2

Click on the Remote Control

button .

The Remote Control window
appears.
As the Wireless Utility window is still
displayed, you can operate the
projector via the Remote Control
window, while using the Wireless
Utility’s functions.
While it is possible to use this function merely to operate the projector, closing the
Wireless Utility also closes the Remote Control window.
Using the wireless LAN PC card (Continued)
■
Displaying a JPEG image saved on a computer via the projector
1

Launch the Wireless Utility software application.

The Screen image transmission mode window appears on the computer’s screen.
2

Click on the File icon .

The Wireless Utility window
changes to File transmission
mode.
3

Click on the Browse button, and select the

file to send.

Clicking on the Browse button displays the Open
dialog box. Select the file to send, then click on the
Open button.
The selected file is added to the pull-down list in the
Wireless Utility’s Transmission File field.
4

Select the file to be sent from the pull-down

list of the Transmission File field.

Click on the Transmission File field’s button
to display the pull-down list. Select the file to be
sent from this list.
A thumbnail of the selected file appears in the
Preview box. The file displayed here will be
transmitted.
Step
3
can be skipped.
The way that drag and drop the file to be sent from the desktop or Windows Explorer
into the Preview box is also available. In this case as well, the selected file is added to
the file pull-down list Transmission File field’s.