4 Replacement Procedures
4. Pull out the black Mylar tab to remove the HDD unit.
Figure 4-15 Removing the secondary HDD
5. Remove the HDD from the HDD case.
Installing the Main HDD
To install the main HDD, follow these steps and refer to the figures in the preceding section.
1. Seat the HDD in the HDD case and bracket, and secure it with four M3×3 silver screws.
2. Insert the HDD unit into the HDD slot.
3. Secure the HDD door with two black M2.5x3 screws.
Installing the Secondary HDD
To install the secondary HDD, follow these steps and refer to the figures in the preceding section.
1. Seat the secondary HDD in the HDD case and bracket, and secure it with four M3×3 silver
screws.
2. Insert the secondary HDD unit into the HDD slot on the right.
3. Secure the HDD door with two black M2.5x3 screws.
Satellite A130/ A135 Maintenance Manual 4-17