Satellite A200/Satellite Pro A200 3-9
Getting Started
Restoring the preinstalled software from the Product Recovery disc
If preinstalled files are damaged, use the Product Recovery disc to restore
them. To restore the operating system and all preinstalled software, follow
the steps below.
1. Load the Product Recovery disc in the drive and turn off the computer's
power.
2. Switch on the computer and, when the In Touch with Tomorrow
TOSHIBA prompt appears, press the F12 key to display the Boot Menu.
3. Use the up or do wn cursor key to se lect the CD-ROM/D VD drive in the
display menu.
4. Follow the on-screen instructions.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost. You can not use System Recovery
Options if restoring the pre-installed software without System Recovery
options.
When removing pre-installed drivers / utilities or when installing, you can
setup the respective drivers / utilities from the following folder.
C: \TOSAPINS\***
When Installing TOSHIBA SD Memory Card Format or other SD utilities,
select TOSHIBA SD Memory Utilities from C:\TOSAPINS\.