12 Setting up your computer and getting started
RG 5.375 x 8.375 ver 2.3.4
Pulling the clips away from the memory module
3Carefully remove the module from the slot.
Static electricity can damage the memory module. Before you handle the
module, touch a grounded metal surface to discharge any static electricity
you may have built up.
To avoid damaging the memory module, be careful not to touch its pin
connector (on the side you insert into the computer).
Avoid touching the connectors on the memory module or on the computer.
Grease or dust on the connectors may cause memory access problems.
Removing the memory module
4Complete the procedure by following steps 9 through 14 in “Installing
additional memory (optional)” on page7.
Checking total memory
When you add or remove memory, you can check that the computer has
recognized the change. To do this:
1Click Start, Control Panel.
2Click Performance and Maintenance.