98 Learning the Basics
Using the optical drive
4Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
5Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in “Caring for optical
discs” on page 102.
6Place the disc carefully in the disc tray, label side up.
(Sample Illustration) Positioning the disc in the drive
7Gently press the disc onto the center spindle until it clicks into
place.
Handle optical media carefully, making contact only with the center
hole and edge. Do not touch the surface of the disc. Do not stack
discs. If you incorrectly handle the discs, you could lose data.
8Make sure the disc is completely on the spindle and is lying flat
on the tray.