153
Utilities

TOSHIBA SD™ Memory Boot Utility

2Insert the SD card.
Be sure to back up your data to external media before performing this
procedure as data on the drive may be lost.
3Click Start, All Programs, Tosh iba , Utilities, and then SD
Memory Card.
The TOSHIBA SD Memory Boot Utility screen appears.
(Sample Image) TOSHIBA SD Mem ory Boot Utility screen
4Select the drive where the SD card is located.
5Select Read from a floppy disk.
6Click Start.
To create a bootable SD card with the Read from an image file
option, you need a third-party application.
Booting from a bootable SD card
To boot from a bootable SD card:
1Create a bootable SD card (see “TOSHIBA SD™ Memory
Boot Utility” on page 152 for instructions).
2Verify that no floppy disk is installed in the optional external
floppy disk drive.
3Insert a bootable SD card into the SD card slot.
4Power on the computer.
NOTE
NOTE