- 9 -
6. LENS

Back-Focus Adjusment

Back-Focus is adjusted at the factory to accommodate most standard lenses.
Sometimes, slight adjustment to the camera back-focus is
necessary.
Loosen the Focus Lock Screw. Achieve a clear image by
rotating the focus ring.
Tighten the Focus Lock Screw.

Auto-iris Lens

This camera supports two types of auto-iris lens: Video
and DC (direct drive) types. Connect the auto-iris
connector plug to the IRIS terminal on the side of the
camera. Refer to the chart below for correct wiring and
Video IRIS Direct Drive
Lens IRIS Lens
1+12V Damp – (y)
2NC Damp + (γ)
3VIDEO Driver + (wh)
4GND Driver – (g)
IRIS Switch VIDEO position DC position
IRIS terminal
pin
Focus Lock Screw
Focus ring
IRIS
Auto-iris lens
43
21
Camera Side
01_p2-p32 06.8.7, 11:08 AM9