Hardware, Utilities and Options

Settings for display video on HDMI

To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed.

■Be sure to use the FN + F5 HotKey to select the display device before starting to play video. Do not change the display device while playing video.

■Do not change the display device under the following conditions.■While data is being read or written.■While communication is being carried out.

Select HD Format

To select the display mode, follow the steps as detailed below:

1.Click Start and click Control Panel.

2.Click Appearance and Personalization.

3.Click Display.

4.Click Change display settings.

5.Click Advanced settings.

6.Click List All Modes.

7.Select the one of the below selection at "List All Modes".

Display mode at "List All Modes"

HD Format

1920 by 1080, True Color (32bit), 60Herts1080p

 

 

1920 by 1080, True Color (32bit), 30Herts

1080i

(Interlaced)

 

 

 

1280 by 720, True Color (32bit), 60Herts720p

 

 

720 by 576, True Color (32bit), 50Herts576p

 

 

720 by 480, True Color (32bit), 60Herts480p

 

 

The above display mode is a typical HDMI display mode. The selectable display modes will vary for different HDMI monitors.

HDMI 1.4 3D Video

Only some models are supported with NVDIA HDMI 1.4 3D Video feature.

When a television is connected to HDMI port and the television is supporting 3D feature, the NVDIA HDMI 1.4 3D Video feature may be enabled through the following procedure.

Before setting up the HDMI 1.4 3D Video feature, please ensure the Internet setup is completed in order to receive notifications via the Internet.

User’s Manual

3-27