Introduction
Identification of controls (Continued)
Inserting batteries
1 Open the battery compart- | 2 Install two “R03/AAA” | 3 Replace the compartment |
ment cover in the direction of | batteries (supplied), paying | cover. |
the arrow. | attention to the polarity |
|
| diagram in the battery |
|
| compartment. |
|
Operation
•Aim the remote control at the remote sensor and press control buttons to operate.
•Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters.
Approx. 5 meters
Caution:
• Never throw batteries into a fire.
Notes:
•Be sure to use AAA size batteries.
•Dispose of batteries in a designated disposal area.
•Attention should be drawn to the environmental aspects of battery disposal.
•Do not mix different battery types or combine used batteries with new ones.
•If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones.
•If the batteries are dead or if you will not be using the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment.
12
5R80201A [E] | 12 | 12/27/04, 4:59 PM |
