
DUPLICATING A VIDEO TAPE
If you connect the TV/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.
1 | Insert a blank cassette with the erase preven- | 2 | Press the INPUT SELECT button to select |
tion tab intact into the TV/VCR. | AUDIO/VIDEO input position. “LINE” will | ||
| Insert a previously recorded cassette into the |
| appear on the screen. |
| playback VCR or Camcorder. |
|
|
|
|
| INPUT SELECT |
|
|
| LINE |
Recording TV/VCR
Playback VCR
To VIDEO | To AUDIO | To Video In | To Audio In | |
OUT | OUT | |||
|
|
Audio/Video cable (not supplied)
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown below.
Recording TV/VCR
Playback Camcorder
To AV jack
To Video/Audio In
Audio/Video cable (not supplied)
3 | Press both the REC buttons | 4 | Press the PLAY Button on the | |
at the same time on the | playback VCR, then press the | |||
| remote control of the TV/VCR, |
| PAUSE/STILL button. | |
| then press the PAUSE/STILL |
|
| |
| button. |
|
|
|
|
|
|
| PAUSE/ |
| REC | PAUSE/STILL |
| STILL |
|
|
|
| PLAY |
Release the recording
5 pause and the playback simultaneously to begin the duplicating process.
PAUSE/PAUSE/STILLSTILL
NOTES: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best result.
•Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.
47