24
A Guide to Simple Problem Solving
Before calling service personnel, please check the following chart for a possible cause to the trouble you are
experiencing.
Symptom Check these things Page
No picture Make sure the power cord is plugged in. 17
Maybe the power is Off or Standby. 17
Check whether the auxiliary equipment is connected. 14
Check the input setting is correct. 14
Signal may not be suitable. 14
The remote control does not
operate Make sure the battery is inserted matching the + and – marks of
the battery compartment. 12
The battery may be exhausted. 12
Use the remote control aiming at the remote control sensor. 11
The picture color is pale, or not
clear Check the picture quality adjustment. 19
If you are using YUV terminals, make sure cables are correctly
connected. N/A
Factory default setting
Input signal selection and its contents
This page can be displayed by using [Down] key while
at the Main Menu page, appeared in page 21.
This page is convenient to check the incoming resolution
as indicated here as 1024x768@60Hz.
“IGP” is indicating that the input signal is coming from
Graphic card signal, as Input Graphic Processor.
When Video signal is selected, “IVP”, Input Video Processor
will appear at lower portion indication.