110 Utilities
Setting passwords
Using a user password
A user password provides power-on password protection.
Setting a user password
If you choose to set a supervisor or user password, TOSHIBA
strongly recommends that you save your password in a location
where you can later access it should you not remember it.
TOSHIBA is not responsible for any losses that may occur to you, your
organization or others as a result of the inability to access your
computer.
To register a password for the power-on password functions:
1To access User Password from the Start screen begin typing
User Password, or while in the Desktop screen double-click
the Desktop Assist icon.
2Click Tools & Utilities.
3Click the User Password icon.
4Click Set.
5Enter your password, and then enter it again to verify.
6Click Set.
7Click OK to save your password as a text file.
8Click Save.
9Click OK.
Deleting a user password
To cancel the power-on password function:
1To access User Password from the Start screen begin typing
User Password, or while in the Desktop screen double-click
the Desktop Assist icon.
2Click Tools & Utilities.
3Click the User Password icon.
A pop-up screen appears asking for a password.
4Enter your password.
5Click Delete.
An authority verification pop-up screen appears.
6Click Delete.
7Enter the password, and then click Verify.
8Click OK to exit.