Operating Basics

Using optical media drives

The text and illustrations in this section refer primarily to the optional media drive. However, operation is the same for other optical drive in the Slim Select Bay. The full-size drive provides high-performance execution of CD/ DVD-ROM-based programs. You can run either 12 cm (4.72”) or 8 cm (3.15”) CD/DVDs without an adaptor. An ATAPI interface controller is used for CD/ DVD-ROM operation. When the computer is accessing a CD/DVD-ROM, an indicator on the drive glows and the Slim Select Bay indicator glows.

Use the WinDVD application to view DVD-Video discs.

If you have a DVD-ROM&CD-R/RW drive, refer also to the Writing CDs on DVD-ROM&CD-R/RW drive section for precautions on writing to CDs.

If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on DVD Super Multi drive section for precautions on writing to CDs.

When the power of the optical media drive is off, pressing the Fn + Tab keys will turn the power of the optical media drive on. Furthermore, it is possible to set it to turn the power of the optical media drive on and eject the tray at the same time. When the power of the optical media drive is off, eject button does not operate. Use a Fn + Tab key and turn ON the power of the optical media drive.

Loading discs

To load CD/DVDs, follow the steps below.

1.When the computer’s power is on, press the eject button to open the disc tray slightly.

EJECT BUTTON

Pressing the eject button

Satellite R10

4-15