Operating Basics
5.Push the center of the disc tray to close it. Press gently until it locks into place.
If the CD/DVD is not seated properly when the disc tray is closed, the CD/ DVD might be damaged. Also, the disc tray might not open fully when you press the eject button.
Closing the CD/DVD disc tray
Removing discs
To remove the CD/DVD, follow the steps below.
Do not press the eject button while the computer is accessing the media drive. Wait for the Slim Select Bay indicator to go out before you open the disc tray. Also, if the CD/DVD is spinning when you open the disc tray, wait for it to stop before you remove it.
1.To pop the disc tray partially open, press the eject button. Gently pull the disc tray out until it is fully opened.
When the disc tray pops open slightly, wait a moment to make sure the CD/ DVD has stopped spinning before pulling the disc tray fully open.
2.The CD/DVD extends slightly over the sides of the disc tray so you can hold it. Hold the CD/DVD gently and lift it out.
Removing a CD/DVD
3.Push the center of the disc tray to close it. Press gently until it locks into place.
Satellite R10 |