Toshiba user manual DRIVE CONNECTORS - SD-R1002, SD-R1002 Combo Drive Rear Panel - Connectors

DRIVE CONNECTORS – SD-R1002

Figure 1.SD-R1002 Combo Drive Rear Panel - Connectors

Power	Power is supplied to your CD-RW/DVD drive by the connection with your computer's
Connector	+5V/+12V power cable to the power socket at the back of drive. One side of the plug has
	chamfered edges, so the power connector fits only one way

CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in upside-down with power ON

Audio	Supplies Analog and Digital sound to your system.
Connectors
ATAPI	The SD-R1002 DVD drive is connected to your computer system through the ATAPI
Connector	connector
Mode	The mode select jumpers are 6 straight angle pins located on the rear of the DVD drive.
Select	By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
Jumper	(Slave) or MA (Master). (see Setup for additional information).

13