Toshiba user manual Drive Connectors -SD-R5002, Audio, Mode Select, Jumper

DRIVE CONNECTORS –SD-R5002

Figure 1.SD-R5002 DVD Rewriteable Drive Rear Panel - Connectors

Power	Power is supplied to your DVD drive by the connection with your computer's +5V/+12V
Connector	power cable to the power socket at the back of drive. One side of the plug has
	chamfered edges, so the power connector fits only one way.

CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in upside-down with power ON.

Audio	Supplies Analog and Digital sound to your system.
Connectors
ATAPI	The SD-R5002 DVD drive is connected to your computer system through the ATAPI
Connector	connector.
Mode Select	The mode select jumpers are 6 straight angle pins located on the rear of the DVD
Jumper	drive. By placing a jumper on the pins, you can select the following functions: CL
	(CSEL), SL (Slave) or MA (Master). (see Setup for additional information).

15