Do not operate Corel Digital Studio immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
CD recorder, DVD-Audio, Video CD functions are not supported in this
version.
Do not run software like a screen saver because it can put a heavy
load on the CPU.
Do not support mp3 decode and encode.
DVD-VR format is not supported in this version.
Before recording the video to DVD or Blu-ray Disc™
When you record DVD disc or Blu-ray Disc™, please use only discs
recommended by the Drive manufacturer.
Do not set the working drive to a slow device like a USB1.1 hard disk
drive or it will fail to write DVD or Blu-ray Disc™.
Do not perform any of the following actions:
Operate the computer for any other function, including using a
mouse or Touch Pad, or closing/opening the display panel.
Bump or cause vibration to the computer.
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
Open the optical disc drive.
Install, remove or connect external devices, including the
following: memory media card, USB device, external display,
optical digital devices.
Please verify your disc after recording important data.
Not support to output VCD and SVCD format.
Force eject disc.
About recorded DVDs and Blu-ray™ discs
Some DVD-ROM drives for personal computers or other DVD players
may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.
When playing your recorded DVD on your computer, please use the
TOSHIBA VIDEO PLAYER software application or TOSHIBA Blu-ray
Disc Player software application.
When playing your recorded Blu-ray Disc™ on your computer, please
use the TOSHIBA Blu-ray Disc Player software application.
If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
TOSHIBA VIDEO PLAYER
Please be aware of the following limitations when you use the TOSHIBA
VIDEO PLAYER:

Notes on use

This software can only be used on Windows 7.
User's Manual 3-15