14
Basic
Photography Getting Ready
Playing/
Erasing Images
Connecting to
the PC
Other
Applications
Additional
Information
Notes on SD card
In this camera, the SD memory card is used for the storage medium.
In this instruction manual, the SD memory card is called “SD card”.
Pay attention to the following notes on handling the supplied SD card.

Cautions

• SD card includes a non-volatile semiconductor memory (NAND Flash EEP-ROM).
Under normal use data stored on SD cards cannot be destroyed (lost). If used
improperly, however, the data may be destroyed (lost). Please note that Toshiba will
accept no responsibility whatsoever for destroyed (lost) data, regardless of the type
or cause of the problem or damage.
• SD card uses part of the memory as the system area based on the SD card, so the
actually usable memory capacity is lower than the indicated capacity.
• SD card is already formatted and can be used as such. If you should want to reformat
a card in order to delete images or folders, however, be sure to do so on the camera.
Formatting the SD memory card on other devices on which the SD logo mark is not
indicated (computers, etc.) may result in problems such as the inability to read or
write data.
• It is recommended that you make backups of important data.

Write Protection

To prevent valuable data from being erased,
switch the write protect tab at the side of the card
to “LOCK”. Data can no longer be overwritten
(Lock status). To write, edit or erase data from
the SD card, release the write-protection state.

Specifications

Type of memory: NAND Flash memory
Temperature for operation: 0°C to 55°C
Temperature for storage: -20°C to 65°C
Operating/Storage humidity: 30% to 80% (no condensation)
Dimensions: 24.0 x 32.0 x 2.1 (W x D x H)
Weight: Approx. 2g
Write-protect tab Write protection state

LOCK LOCK