Toshiba T1 Series PLCs manual More Analog Inputs for T1 μPLCs, Toshiba International Corporation

In Touch With Tomorrow

Programmable Controllers

TOSHIBA INTERNATIONAL CORPORATION

13131 West Little York Road Houston, TX 77041 PH. 800 231- 1412, 713-466-0277 FAX 713-466-8773

E- Mail plc@tic.toshiba.com

PRODUCT INFORMATION October 2002

More Analog Inputs for T1 μPLCs

Eagle 0800

8Analog Inputs

Also	Eagle 0201			Eagle 0404
	2	Analog Inputs	4	Analog Inputs
Available
	1	Analog Output	4	Analog Output

Toshiba Houston offers the Eagle analog I/O for the T1 Series μPLCs. The Eagle I/O is universal analog I/O. Eagle I/O allows T1 PLCs to work with the following analog signals.

Analog Inputs		Analog Outputs
♦ Thermocouples	♦ 0-20 mA	♦ 4-20 mA
♦ RTDs	♦ 4-20 mA	♦ 0-100 mV
♦ 0-50 mV	♦ 0-100 mV	♦ 0-10 Vdc

For the analog inputs, the Eagle I/O performs the A to D (analog to digital) conversion and loads a digital value directly into a T1 register. For analog outputs, the Eagle I/O reads a digital value out of a T1 register and performs a D to A (digital to analog conversion). Analog signal types and PLC registers are defined using the included simple setup software.

Simple process control has never been easier or more cost effective. Now the analog values of temperature, pressure, flow, weight, etc. can be included into the sequencing, interlocking and permissive control performed by the PLC.

For more information contact your nearest Toshiba programmable controller distributor, or visit the Toshiba Houston Industrial website, www.tic.toshiba.com.