Toshiba T300MVi Model Range, Power Requirements, Control Specifications Input, Control Interface

T300MVi

MODEL RANGE

300 to 600 HP

700 to 1000 HP

1250 to 2000 HP

2250 to	3000 to
2500 HP	3500 HP

4000 to 6000 HP

7000 HP*

8000 to 10000 HP*

Voltage Rating														4160 VAC
Dimensions (H x W x D)	103.7 x 48 x 48 in.				103.7 x 60 x 48 in.				103.7 x 122 x 43.4 in.				103.7 x 164		103.7 x 174		103.7 x 222 x 49.5 in.					103.7 x 307.5	103.7 x 402.5
													x 49.5 in.		x 49.5 in.							x 60 in.		x 60 in.
Weight		6,200 lbs.				7,600 lbs.				12,500 lbs.			16,500 lbs.		19,000 lbs.			27,750 lbs.				37,500 lbs.	64,800 lbs.
Current Rating (A):	37	50	62	74	87	99	112	124	155	186	217	248	279	310	372	434	496	558	620	682	744	868	992	1100	1240
Nominal HP** (4160 V)	300	400	500	600	700	800	900	1000	1250	1500	1750	2000	2250	2500	3000	3500	4000	4500	5000	5500	6000	7000	8000	9000	10000
POWER REQUIREMENTS
Input Tolerance	Voltage: ±10%; Frequency: ±5%
Main Circuit	Three-Phase 4160 V; Integrated 24-Pulse Copper-Wound Isolation Transformer; Five-Level NPC Medium Voltage IGBT Output
Control Circuit	Integral to Main Transformer; Includes 460 V & PT for 120 V Control
Output Frequency	0 to 120 Hz
CONTROL SPECIFICATIONS INPUT
Control Method	Five-Level Pulse-Width Modulation (PWM) Output Control with Neutral-Point Clamping (NPC)
V/Hz Control	V/Hz, Sensorless Vector Control, Variable Torque, Closed-Loop Vector Control, & Constant Torque (Optional)
PWM Carrier Frequency	Fixed at 2 kHz
Frequency Setting	4 to 20 mA, 0 to 10 VDC Serial Communication Input, & Rotary Encoder Integrated into EOI
Speed Regulation	Open Loop: Up to 0.5%; Closed Loop: Up to 0.1%

Main Protective Functions

Current Limit, Overcurrent, Overload, Undervoltage, Overvoltage, Ground Fault, CPU Error, & Soft Stall

Overload Current Rating	100% Continuous; 115% for One Minute Every 20 Minutes (1000, 2000, & 6000 HP at 110%)
CONTROL INTERFACE
Digital Input	Eight Discrete Input Terminals with Programmable Functions
Digital Output	Six Available Digital Programmable Outputs (One Used Internal to Drive)
Analog Input	Two Selectable Currents (0/4 to 20 mA) or Voltage (0 to 10 VDC) Input Signals
Analog Output	Eight Selectable Currents (0/4 to 20 mA) or Voltage (0 to 10 VDC) Output Signals with Programmable Function
Communication Ports	Profibus, Modbus RTU, Modbus, TCP/IP, TOSLINE-S20, & DeviceNet
SAFETY FEATURES	Standard Pad-Lockable Input Fuse Disconnect Switch with Vacuum Contactor, Interlocked Doors, & Viewing Window
ELECTRONIC OPERATOR INTERFACE (EOI)
Display	6-Line x 20-Character Graphical Plain-English Back-Lit LCD Display for Programming, Monitoring, & Diagnostics
LED Indicators	Run (Red)/Stop (Green) & Local (Green)
Keys	Local/Remote, Enter, Mon/Prg, Esc, Run, & Stop/Reset

Monitoring

Frequency Command Screen; Multiple Parameters Displayed: Motor Current, Motor Speed, Motor Voltage, DC Voltage, Input Voltage, Output Voltage, Run Time, Output Power, Motor kW, Motor kWH, Motor kVAH, Motor kVAR, & On-Time Control Power

CONSTRUCTION

Enclosure	ANSI-61 Gray; NEMA 1 Ventilated, & IP20 Per IEC-60529; Gasket & Filter; Free-Standing; Front-Access Only
Power Cables	Top/Bottom Access for Input/Motor Cables
Cooling	Forced-Air Cooled (Redundant Fan Option)
Standards & Compliances	NEC, NEMA, UL, ULC, ANSI, & American Recovery & Reinvestment Act Compliant
AMBIENT CONDITIONS
Ambient Temperature	0 to 40°C (50°C Option Available)
Altitude	3,281 ft. Above Sea Level (Up to 14,764 ft. Option Available)
Humidity	95% Maximum (Non-Condensing)
Installation	Indoor; No Direct Sunlight; Protect from Corrosive Gases
	All Information Subject to Change
	*Models Not UL Listed
	**Typical HP Rating of a 4-Pole Motor; Contact Factory for Applications on Constant Torque Loads

TOSHIBA INDUSTRIAL PRODUCTS:

• Adjustable Speed Drives

• Motors
• Motor Controls
• Instrumentation & PLCs	www.toshiba.com/ind
• Uninterruptible Power Systems

© 2012 Toshiba International Corporation • Industrial Division • 13131 West Little York Road • Houston, Texas 77041 USA • Tel +713-466-0277 US 1-800-231-1412 • Rev. 120221