Connecting a Video Player
1If your video player uses a round, one-prong composite video connector, you’ll need only the audio cable, audio adapter, and composite video cable that shipped with the projector.
•If your video player uses a round, four-prong S-video con- nector, you’ll need an S-video cable in addition to the audio cable and audio adapter. The S-video cable is sold sepa- rately. (See “Optional Accessories” on page 37.)
2Plug the composite video cable’s yellow connector into the “video-out” connector on your video player (Figure 6). This connector may be labeled “To Monitor.”
•If you’re using an S-video cable, connect it to the “S-video out” connector on the video player (Figure 7).
3Plug the other yellow connector into the composite video con- nector 
on the projector.
•If you’re using S-video, plug the other end of the cable into
the “S-video” connector 
on the projector (Figure 7).
audio
adapter
composite video cable 
audio cable
FIGURE 6
Connecting the projector to a video player using the standard video cable (with com- posite video connector) and the audio cable and adapter
