Connections (continued)
IN
| ( |
|
AUDIO |
|
|
OUT IN |
|
|
| OUT RF |
|
CH | ( |
|
VIDEO |
|
|
|
| Cable box |
Incoming cable | IN | OUT |
IN
(FROM ANT.)
AUDIO
OUT IN
OUT RF
(TO TV)
CH
VIDEO
Cable box
IN OUT
Incoming cable
A/B switch
A
A
B
B
Cable box
IN
(FROM ANT.)
AUDIO
OUT IN
OUT RF
(TO TV)
CH
VIDEO
Cable box
IN
(FROM ANT.)
AUDIO
OUT IN
OUT RF
(TO TV)
CH
VIDEO
This
–record an unscrambled channel.
–watch an unscrambled channel while recording it.
–record an unscrambled channel while watching another (scrambled or unscrambled).
You will need to:
•set TV channel to the output channel of the cable box.
•turn on the cable box and select cable channel 3 or 4 according to the output channel of the VCR.
•to record a channel while watching another, press TV/VCR on the remote control to turn off the “VCR” indicator in the VCR display and select a desired cable channel on the cable box.
This
–watch an unscrambled or scrambled channel while recording it.
–record any channels through the cable box.
You will need to:
•set TV channel 3 or 4 to receive video signals. (See page 11.)
•set VCR channel to the output channel of the cable box, and select a desired cable channel on the cable box.
•while the VCR is turned off or the “VCR” indicator is not lit in the VCR display, set TV channel to the output channel of the cable box.
This
–watch an unscrambled or scrambled channel while recording it.
–record an unscrambled channel while watching another unscrambled channel (only when you connect a
•A/B switch “A”: record and watch an unscrambled channel which comes bypassing the cable box.
•A/B switch “B”: record and watch a scrambled or unscrambled channel coming through the cable box.
This
–watch or record a channel through the cable box via the LINE IN (AUDIO/VIDEO) jacks.
You will need to:
•press I.SELECT so that the VCR display shows “L”.
12