RECORDING
Timer Program Recording
The programmable timer allows you to record up to 6 different programs over one month.
Preparation
•Select the video channel (3 or 4) or video input mode on the TV.
•Make sure that the clock is set correctly (page 16).
•Store the channels on the VCR (pages 17 and 18).
•If you record cable channels, finish the cable box
•If you record satellite channels, finish the DSS® satellite receiver
Timer Programming Procedure
1 | 2 | 3 | 4 |
4 | 5 | 6 | |
|
|
| |
7 | 8 | 9 |
|
Example: To record cable channel 25 in the SP tape speed from 9:30 p.m. until 10:00 p.m. on August 30. Today is August 25.
1 Load a cassette with the safety tab attached.
2 Press PROG. to display the MENU screen.
0 | 100 |
| |
|
| 10 | |
PLAY/x2 | REW | ||
FF | |||
|
| ||
REW |
| FF | |
| STOP | PLAY/x2, | |
|
| STOP | |
|
| ENTER |
3 Select “PROGRAM” usingFF or REW, and press ENTER.
| PROGRAM |
|
| SET UP |
|
| PRESET |
|
|
|
|
| |||
|
|
|
|
|
| OFF SPD | |
| CH DATE | On | |||||
|
EnD: PROG
CANCEL |
2, 9
4 Move to the next using FF, and enter the channel number 25 by using PLAY/x2, STOP or number buttons.
PROGRAM |
|
| SET UP |
|
| PRESET | ||||
|
|
|
| |||||||
|
|
|
|
|
|
| OFF | SPD | ||
CH DATE | On | |||||||||
| 25 |
| – | SLP |
EnD: PROG
•To record a cable program from the connected cable box:
Enter the cable channel number by number buttons, PLAY/x2 or STOP.
If your cable box is not
•To record a satellite program from the connected DSS® satellite receiver:
Enter the satellite channel number (100 to 999) by number buttons, PLAY/x2 or STOP. (If a number 1 to 99 is entered, the VCR will record a TV/CATV program on the channel, not a satellite’s.)
If your DSS® satellite receiver is not
To make corrections:
Press REW to move back to the item, or FF to forward.
2 6