32
The 8/16 Channel DVSe has up to 16 looping outputs. Depending on the destination of the looping outputs, each one may have to be
terminated.
CH 1 inCH 2 inCH 3 inCH 4 inCH 5 inCH 6 inCH 7 inCH 8 inCH 9 inCH 10 inCH 11 inCH 12 inCH 13 inCH 14 inCH 15 inCH 16 in
CH 1 OutCH 2 OutCH 3 OutCH 4 OutCH 5 OutCH 6 OutCH 7 OutCH 8 Out CH 9 Ou tCH 10 OutCH 11 OutCH 12 Ou tCH 13 OutCH 14 OutCH 15 Out CH 16 Out
The 32 Channel DVSe has up to 32 looping outputs. Connect the included 16 Channel BNC Connector Cables to the 16 Ch annel Cable
Adapter ports.
The video inputs/outputs are 75 Ώ BNC connectors. Make sure there is a video source connected to the input and then connect a cable to the
Channel Out on the BNC Connector Cable. The looping outs can be connected to video monitors or combined with adapters to connect to
VCRs.
When it is necessary to terminate a looping output, the recorder has built in termination that allows users to select individual outputs. It is not
always necessary to terminate the output; it depends on the device to which you are connecting. As a rule, if t he image appears distorted or
virtually unviewable, it likely needs to be terminated.
Always leave the dipswitch set to the ON position when the Looping Outputs are not used.
ON Not connected to a monitor (Normal)
OFF Connected to a monitor (Looped)
CONTROL
1 2 3 4
COM
SENSOR
ON
OFF
ON
OFF
BNC A
BNC B