Quick Installation & Troubleshooting Tips
Please foll ow the following descriptions stepby step. (The 7 diagrams can also be your references):
Step 1 | Step 2 | Step 3 | Step 4 | Step 5 Ste p 6 | Step 7 |
Step 1 | Plug o neterminal of the VGAcable to the sig nal conne ctor at th e rear of t he LCD M onitor. |
Step 2 | Plug theother terminal o f the VGA cable to t he signal connecto r at the r e ar of PC. |
Step 3 | Plug A dapter ou tput to th e jack at t he rear of LCD Monitor. |
Step 4 | Plug thePower cord to the Adapter. |
Step 5 | Conn ect the Power cord to pow er o utlet. |
Step 6 | Turn o n the LCD Monitor and PC. |
Step 7 | You can also plug in RCA jack to connect y o ur video s ource like DVD or VCR. |
| You can view v ideo over PC by pressing "PIP" button on remote controller. |
In the event that you experience trouble with your Display, check the following items before contacting the dealer from whom the Display was purchased. The most common problems usually involve an incorrectly an incorrect connection from the Video Card to the Display. We recommend that you also consult your Video Card User’s manual during the Troubleshooting Procedure. Do not exceed the maximum refresh rate recommended for the display.
Problem | Troubleshooting Tip | |
No image on display | 1. | Check that power cord of the Computer has been |
screen |
| connected securely into wall outlet or grounded |
|
| extension cable or strip. |
| 2. | Check that power switch of the Display has been |
|
| pressed and LED on the front of Display is lit. |
| 3. | Check that Video (Signal) cable from the Display |
|
| has been securely and correctly connected. |
| 4. | Check that Video Card is firmly seated in card slot |
|
| of Computer motherboard. |
| 5. | Check that the video input from the Video Card |
|
| falls within the timing range. |
Abnormal image | 1. | Check that the video input from the Video Card |
|
| falls within the timing range. |
| 2. | Check that Video (Signal) Cable from the Display |
|
| has been securely and correctly connected to the |
|
| Video Connector at the rear side of the Computer. |
Colors of image on | 1. | Check that Video (Signal) Cable from the displays |
screen are abnormal |
| has been securely and correctly connected to the |
|
| |
|
| computer. |
Disturbances on | 1. | OSD adjustment is incorrect. Please consult |
Screen |
| section for OSD screen adjustment procedures. |
Please contact your local authorized distributors /retailers if you run into other unsolved problems.
Page 19
