Easy Smart Configuration Utility User Guide
Figure 6-6 802.1Q VLAN PVID Setting
The following entries are displayed on this screen:
802.1Q VLAN PVID Setting
Select: Select the desired port for configuration. It is multi-optional.
Port: Displays the port number.
PVID: Enter a PVID number for the port. When adding the tag header to
the received untagged packet, the switch will automatically uses
this PVID value as the VLAN ID of the added tag.
LAG: Displays the LAG to which the port belongs.
Note:
1. 802.1Q VLAN should be enabled before setting PVID.
2. You can go to Switching→Port Trunk page to configure the LAG status of the port.
Return to CONTENTS
32