TP-Link 8-Port 10/100Mbps Desktop PoE Switch Chapter 3. , Identifying External Components ,

5
2.2 Power On
The TL-SF1008P Switch can be used with DC power supply.
Powering on the Switch, it will automatically initialize and its LED
indicators will respond as follows:
1) Firstly, the Power LED indicator will light up.
2) Then, the 100Mbps and Link/Act LED indicators will flash
momentarily for one second, which represents a resetting of
the system.
Note
If the LED indicators don’t respond as described above, please
check the power supply and its connection.
Chapter 3. Identifying External Components
This Chapter describes the front panel, rear panel and LED indi-
cators of the Switch.
3.1 Front Panel
Figure 3-1 TL-SF1008P Switch Front Panel
The Switch’s LEDs are located on the front panel.