TP-Link AV600 appendix LED and Button Descriptions, Network Installation, To add another adapter

Quick Installation Guide

AV600 Gigabit Powerline Adapter

MODEL NO. TL-PA6010

Package Contents

	AV600 Gigabit Powerline Adapter
	TL-PA6010
Powerline Adapter *	QIG

Resource CD Ethernet Cable

*The provided power plug may di￿er from the picture due to di￿erent regional power speci￿cations. Here we take the EU version as an example.

Warning on Final Location

REV1.0.0
7106504321
	NOTE: It's strongly recommended that you plug the adapter directly into the

wall socket, for some power strips have surge protector which can ￿lter data.

1 LED and Button Descriptions

Ethernet LED

Powerline LED

Power LED

Pair Button

2 Network Installation

Item

Power LED

Powerline LED

Ethernet LED

Status	Description
Solid	The adapter is on.
Blinking	The adapter is in power-saving mode or in pairing
	procedure.
O￿	The adapter is o￿.
Solid	The adapter is connected to a powerline network.
Blinking	The adapter is transferring data.
O￿	The adapter isn’t connected to any powerline network
	or is in power-saving mode. *
Solid	The Ethernet port is connected, but there is no data
	being transferred.
Blinking	The Ethernet port is transferring data.
O￿	The Ethernet port isn’t connected.

TP-LINK powerline adapters are Plug and Play. After taking the steps above, you can surf the Internet.

To add another adapter

Plug an additional adapter into the wall socket, and the connection will be established automatically within 60 seconds.

*Five minutes after the device connected to the adapter is turned o￿, the adapter will automatically switch to power-saving mode.

Item	Description
Pair Button	Pair button is used to secure a powerline network. To secure
	your network, please refer to Appendix: Using the Pair Button.

NOTE:

1.To surf the Internet, please make sure that your network is properly connected to the Internet.

2.If the adapters fail to automatically link to each other, you can establish a private network by using the pair button. To set up a private network, please go to Appendix: Using the Pair Button for detailed instructions.