TP-Link MC110CS, MC112CS, MC100CM Conventions, Features, Connectors and Network Cables Supported

1.2 Conventions

The Converter mentioned in this guide stands for Fast Ethernet Media Converters or the WDM Fast Ethernet Media Converters without any explanation.

The TP port mentioned in this User Manual stands for the TX port without any explanations.

Note:

The four converters are sharing this User Guide. The differences between them please refer to the table of the section 1.4.

1.3 Features

¾Complies with 802.3u 10/100Base-TX, 100Base-FX standards.

¾Provides one SC fiber connector and one RJ-45 connector.

¾Supports auto negotiation of duplex mode on TP port.

¾Supports auto negotiation of 10/100Mbps and auto MID/MID-X for TP port.

¾Supports Link Fault Pass Through function and Far End Fault function.

¾Extends fiber distance up to 2km for multi-mode fiber and 20-60km for single-mode fiber.

¾Easy-to-view LED indicators provide status to monitor network activity easily.

¾External power supply.

1.4 Connectors and Network Cables Supported

The connectors and network cables supported by the converter are listed as follows.

3