TD-8616 ADSL2+ Modem User Guide
14
4.2 Basic Setup
Choose “Basic Setup”, you can see the next submenus: WAN Setting, LAN Setting and ADSL.
Figure 4-4
Click any of them, and you will be able to configure the corresponding function.

4.2.1 WAN Setting

Choose “Basic Setup→WAN Setting” menu, you can configure the parameters for WAN ports in
the next screen (shown in Figure 4-5).
Figure 4-5
¾ WAN Setting: WAN settings are used to connect to your ISP. Your ISP provides VPI (Virtual
Path Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally
setup 2 VCs on different encapsulations, if you apply 2 different virtual circuits from your ISP.
You need to activate the VC to take effect. For PVCs management, you can use ATM QoS to
setup each PVC traffic line's priority.
• Virtual Circuit: Select the VC number you want to setup, PVC0~PVC1.
• PVC Summary: Click PVC (Permanent Virtual Circuit) Summary button and Figure 4-6
will display. Two items of VC information have been entered into the Modem for simplify
your operation. You can use it directly without any configuration.