TD-8817 ADSL2+ Ethernet/USB Modem Router User Guide
27
Figure 4-13
Service name: Specify a name for the PPPoA/PPPoE connection for recognition.
Username: Enter your username for your PPPoA/PPPoE connection to identify and verify
your account to the ISP.
Password: Enter your password for your PPPoA/PPPoE connection.
Encapsulation: For both PPPoA/PPPoE connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
Bridge Interface: Activate the option, the modem router can also work in Bridge mode.
Connection: For PPPoA/PPPoE connection, you can select Always on or Connect
on-Demand or Connect Manually. Connect on demand is dependent on the traffic. If there
is no traffic (or Idle) for a pre-specified period of time), the connection will tear down
automatically. And once there is traffic send or receive, the connection will be automatically
on.
TCP MSS Option：Enter the TCP MSS as your desire. The default value is 1400.
Default Route: You should select Yes to configure the PVC as the default gateway to
Internet from this device.
DHCP IPv6: There are two types of assignation for IPv6 address: DHCP (Dynamic Host
Configuration Protocol) Server and SLAAC (Stateless address auto-configuration). Select
your assignation type accordingly.
DHCP PD: The DHCP PD (Prefix Delegation) function is disabled by default. If you want to