TD-VG3511 150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
36
• End IP Address: Enter a value for the DHCP server to end with when issuing IP
addresses. The End IP Address must be smaller than 192.168.1.254. The default End IP
Address is 192.168.1.199.
• Leased Time: The Leased Time is the amount of time in which a network user will be
allowed connection to the Modem Router with their current dynamic IP address. Enter the
amount of time, in hours, then the user will be “leased” this dynamic IP address. After the
dynamic IP address has expired, the user will be automatically assigned a new dynamic IP
address. The default is 1440 minutes.
The detailed configuration about DHCP server, please refer to section 4.5 DHCP Server.
4.4.5 MAC Clone Choose menu “Advanced Setup”Æ“MAC Clone”, you can configure the MAC address of the
WAN Interface as shown below.
The WAN Connection List displays the Interfaces you have configured on the section 4.4.1 WAN
Settings, 4.4.2 EWAN and its default MAC Address. You can select corresponding WAN Interface
from the drop-down list and click MAC Clone button to clone your current PC MAC, and then click
Save.
Figure 4-16
) Note:
Only the PCs in LAN can use this function. MAC clone may cause reconnection. After MAC Clone,
the bridge connections sharing the same VPI/VCI with other connections may not work. To make
sure other connections can work well, we suggest that you avoid cloning the same MAC address
to them.
Choose menu “Advanced Setup”Æ“ALG Settings”, and then you can configure the basic
security in the screen as shown in Figure 4-17.