TP-Link td-w8961nd 4.4.2 Routing

TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
40
Figure 4-25
 Firewall: Select this option can automatically detect and block Denial of Service (DoS)
attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack.
 SPI: If you enable SPI, all traffics initiated from WAN would be blocked, including DMZ,
Virtual Server, and ACL WAN side.
4.4.2 Routing
Choose “Advanced Setup→Routing” menu, and you will see the routing information in the next
screen (shown in Figure 4-26).
Figure 4-26
Click ADD ROUTE button to add a new route in the next screen (shown in Figure 4-27).
Figure 4-27
 Destination IP Address: This parameter specifies the IP network address of the final
destination.
 IP Subnet Mask: Enter the subnet mask for this destination.