TD-W8962ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
73
when the upgrade is complete.
4.16.9 Reboot Choose menu “System Tools” → “Reboot”, and then you can click the Reboot button to reboot
the Modem Router via the next screen.
Figure 4-70
Some settings of the Modem Router will take effect only after rebooting, which include
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Wireless configurations.
• Change the Web Management Port.
• Upgrade the firmware of the Modem Router (system will reboot automatically).
• Restore the Modem Router's settings to factory defaults (system will reboot
automatically).
• Update the configuration with the file (system will reboot automatically.
4.16.10 Statistics Choose menu “System Tools” → “Statistics”, and then you can view the statistics of the Modem
Router, including total traffic and current traffic of the last Packets Statistic Interval.
Figure 4-71
¾ Statistics Status: Enable or Disable. The default value is disabled. To enable it, click the
Enable. If it is disabled, the function of DoS protection in Security settings will be disabled.
¾ Statistics Interval (5-60): The default value is 10. Select a value between 5 and 60 seconds
in the drop-down list. The Packets Statistic interval indicates the time section of the packets
statistic.
Click Reset All to reset the values of all the entries to zero.