TP-Link TD-W8968 4.5.6 MAC Clone , 4.5.7 ALG Settings

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
40
2) If Static is selected, please complete the following parameters.
Figure 4-23
• Site Prefix: Enter a value for the site prefix.
• Site Prefix Length: Enter a value for the site prefix length.
Click the Save button to save the settings.
4.5.6 MAC Clone
Choose menu “Advanced Setup”Æ“MAC Clone”, you can configure the MAC address of the
WAN Interface as shown below.
The WAN Interface List displays the Lay2 Interfaces you have configured on the section 4.5.1
WAN Settings and its default MAC Address. You can select corresponding WAN Interface from the
drop-down list and click Clone button to clone your current PC MAC, and then click Save.
Figure 4-24
) Note:
Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not
be the same with each other.
4.5.7 ALG Settings
Choose menu “Advanced Setup”Æ“ALG Settings”, and then you can configure the basic
security in the screen as shown in Figure 4-25.