TP-Link TD-W8968 4.7 Wireless

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide

4.7 Wireless

Choose “Wireless”, there are six submenus to configure Wireless LAN settings. Click any of them,

and you will be able to configure the corresponding function. The detailed explanations for each

submenu are provided below.

Choose “Wireless”Æ”Basic Settings”, you will see the screen of Wireless Basic Settings shown

as below. The basic settings for wireless networking are set on this screen.

Figure 4-31

This page allows you to configure basic features of the wireless LAN interface. You can enable or

disable the wireless LAN interface, hide the network from active scans, set the wireless network

name (also known as SSID) and restrict the channel set based on Region requirements.

¾ SSID: Wireless network name shared among all points in a wireless network. The SSID must

be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32

characters (use any of the characters on the keyboard). Make sure this setting is the same for

all stations in your wireless network. Type the desired SSID in the space provided.

¾ Region: Select your region from the pull-down list. This field specifies the region where the

wireless function of the Router can be used. It may be illegal to use the wireless function of

the Router in a region other than one of those specified in this field. If your country or region

is not listed, please contact your local government agency for assistance.

¾ Mode: Select the desired mode.