COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. 
is a registered trademark of
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from
Installation:
1. Assembly the two pieces of reflector symmetrically.
2. Mount the feed horn on the reflector according to the Mounting diagram. Make sure the feed dipoles parallel with most bars of the grid reflector. When the feed dipoles and most grid bars are vertical to the ground, the antenna is vertical polarized. When the feed dipole and most grid bars are horizontal to the ground, the antenna is horizontal polarized.
3. Mount the “L” type bracket at the back of the reflector, then mount the antenna on the mast supplied by customer according to the Mounting diagram.
4. Test the antenna with equipment to make sure the antenna receive the best signal by turning the azimuth and pitching angle, then lock all the screws and seal the connector between antenna and cable.
1 |
| 2 |
