TP-Link TL-POE200 manual Connecting the Power over Ethernet Adapter Kit

LAN OUT: Connect to the Ethernet device with CAT5 UTP cable to transmit data.

DC OUT: Connect to the power port of the Ethernet device with the provided power cable to supply the power of 5V, 9V or 12V DC.

PWR: Power LED, a steady green light indicates that the PoE Injector can supply power.

)Note:

TL-POE200 Power over Ethernet Kit is not compliant with IEEE 802.3af standard. The TL-POE200A (PoE Injector) and TL-POE200B (PoE Splitter) can only be operated together. Pairing the devices with any other PoE adapter is dangerous.

Chapter 3 Connecting the Power over Ethernet Adapter Kit

This chapter gives instructions on how to connect the Power over Ethernet Adapter Kit. Once connected, the Kit will transmit data and power over the Ethernet network cable to your remotely located network device.

To connect the Power over Ethernet Adapter Kit, please take the following steps.

4