and then restarted.
¾ Firmware Upgrade: Upgrade the device software. Click Browse… and select the file for
upgrading. A confirmation dialogue will appear. Click OK to start. This IP Camera will reboot
after upgrading has been finished.
) Note:
Use only upgrade files that are special for this IP Camera. Otherwise problems may occur. Don't
turn off the IP Camera power or disconnect the network until the upgrading is completed.
¾ Upload Language Pack: Upgrade the device language pack. Click Browse… and select
the file for upgrading. A confirmation dialogue will appear. Click OK to start upgrading. The
upgrade is applied immediately. The default language is “English”.
6.2 Camera Click Camera to display the submenus including General, MPEG4 and MJPEG.
23