Quick Installation Guide
Wireless Pan/Tilt Surveillance Camera
MODEL NO.
Package Contents
Camera | Mounting Bracket | Power Adapter |
|
| Quick Installation Guide |
|
| Wireless Pan/Tilt Surveillance Camera |
|
| MODEL NO. |
Ethernet Cable | Resource CD | QIG |
(*The pictures are for reference only.)
System Requirement
The following operating systems are supported:
Windows 2000 | Windows 2003 | Windows XP |
Windows Vista | Windows 7 | Mac |
The following browsers are supported:
Internet Explorer 6 or higher |
| |
Safari | Firefox | Chrome |
(*Windows and Internet Explore Browser are recommended.)
1 Warning Before Installation
Do not keep the Camera exposed to direct sunlight.
Do not place the Camera in high humidity environments such as in a kitchen.
Do not place the Camera where there are high temperatures such as near an oven.
Do not place the Camera near devices that emit radio waves, such as mobile phones.
2 Physical Description
| Antenna Connector |
Power Connector | Audio Out |
| |
| Network Connector |
| General I/O Terminal Block |
| 12V DC Audio in Audio out Ethernet | I/O | |||
Reset Button | reset |
|
| Audio In | |
|
|
|
| ||
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
| |||
|
|
|
|
|
|
| Power LED | |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| Ethernet LED | |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
Item | Description | |||||||
|
|
|
|
|
|
|
| |
| Power LED | • Solid: The electrical power is on. | ||||||
|
|
|
|
|
|
| ||
| t | • Off: There is no electrical power. | ||||||
|
| |||||||
|
| • Solid: The Ethernet port is linked, but there is no activity. | ||||||
Ethernet LED | • Blinking: There is trac between the Ethernet port and | |||||||
the network. | ||||||||
|
| |||||||
|
| • Off: There is no network connection. | ||||||
|
|
| ||||||
|
| • Step 1: | ||||||
Reset Button | until it restarts up normally. | |||||||
• Step 2: Press the button for more than 10s, then it will be | ||||||||
|
| restored to factory defaults after automatic rebooting. | ||||||
|
|
|
|
|
|
|
| |
3 Camera Mounting
| Hollow anchors | Type A screws | Type B screws |
| NOTE: In the bracket, there are several mounting holes arranged in a circle. The direction of the camera’s | ||
| installation can be anywhere within a 360 degree scope, adjusted as required. | ||
| It is strongly recommended that you connect the Ethernet cable and power adapter cord to the camera rst | ||
Bracket | before mounting. |
|
|
4 Hardware Connection
Connect the Camera to the LAN network (Router or Switch) via Ethernet cable.
Connect the power adapter cord to the DC In jack.
Plug the power adapter into the power outlet.
*For wireless connection, please refer to User Guide on the Resource CD.
Ceiling Mount
1Fix the camera to the bracket with two type A screws .
2Fix the bracket and camera to the ceiling using two type B screws and two hollow ceiling anchors.
Wall Mount
1Fix the bracket to the wall using two type B screws and two hollow wall anchors.
2Fix the camera to the bracket with two type A screws .
Before proceeding, conrm that your PC is connected to your router and can access the Internet.
Make sure that your router’s DHCP feature is enabled. If not, please refer to your router’s instruction to enable it.
12V DC | Audio in Audio out EthernetI/O | Internet |
reset |
|
Power Cable 
1 | 2 | 3 |
WAN LAN
Router
Ethernet Cable 
7106503435
