TP-Link TL-SG2424P 8.2 Multicast IP

2 Configure ports On VLAN→802.1Q VLAN function pages.

For port 3, configure its link type as GENERAL and its egress

rule as TAG, and add it to VLAN3, VLAN4 and VLAN5.

For port 4, configure its link type as GENERAL and its egress

rule as UNTAG, and add it to VLAN3 and VLAN 4.

For port 5, configure its link type as GENERAL and its egress

rule as UNTAG, and add it to VLAN3 and VLAN 5.

3 Enable IGMP

Snooping function

Enable IGMP Snooping function globally on Multicast→IGMP

Snooping→Snooping Config page. Enable IGMP Snooping

function for port3, port4 and port 5 on Multicast→IGMP

Snooping→Port Config page.

4 Enable Multicast

VLAN

Enable Multicast VLAN, configure the VLAN ID of a multicast

VLAN as 3 and keep the other parameters as default on

Multicast→IGMP Snooping→Multicast VLAN page.

5 Check Multicast

VLAN

3-5 and Multicast VLAN 3 will be displayed in the IGMP

Snooping Status table on the Multicast→IGMP Snooping→

Snooping Config page.

8.2 Multicast IP

In a network, receivers can join different multicast groups appropriate to their needs. The switch

forwards multicast streams based on multicast address table. The Multicast IP can be

implemented on Multicast IP Table and Static Multicast IP page.

On this page you can view the multicast IP table on the switch.

Choose the menu Multicast→Multicast IP→Multicast IP Table to load the following page.

Figure 8-8 Multicast IP Table

The following entries are displayed on this screen:

 Search Option

Multicast IP: Enter the multicast IP address the desired entry must carry.